One Bulb Can Change A Lot...

As the selection of light bulbs grow in the aisles of the nation's hardware stores, many arguments have begun to surface regarding which is better, worse, and everything in between. Like many products, there are pros and cons and these pros and cons only continue to multiply as the technology continues to grow.

On a short list it's pretty clear to see that CFL bulbs are better than incandescent bulbs, and LED bulbs are better than both of them, but one must really pull back the layers of the onion to see the true pros and cons for each comparison.


Here's a great comparison video courtesy of alternativee.org:



It's pretty easy to see where the energy efficiency lies, but many other factors come along with each type of bulb. In my own home, I have opted to go with CFL bulbs in almost all my fixtures minus the fixtures that are on occupancy sensors. CFL bulbs can't handle the constant on/off from the sensors compared to incandescent bulbs. I would love to use Edison base LED bulbs in my home, but the price point is still too high and the technology still has a little ways to go before they can truly compete with CFLs. I do recommend using LEDs for under-cabinet lighting, holiday lighting, and flashlights/lanterns since the technology is pretty stable and the use factor is pretty low.

Each bulb type has a few major drawbacks for me, but as long as you weigh the pros and cons it's easy to derive at a choice.

• Incandescent bulbs use a lot of energy and actually lose a majority of that energy through heat loss. If you live in a hot climate, you really don't need your light bulbs raising your home's temperature causing more money to be spent on cooling. Due to that heat loss, your incandescent bulbs are expelling more heat then you're receiving in actual lumens, i.e. LIGHT.

• CFL bulbs contain mercury which can be dangerous in certain amounts. Due to the mercury in CFL bulbs special precautions should be taken when disposing burnt out or broken bulbs. You should always dispose CFL bulbs at specialized recycling centers... never throw them away with your trash! Some people feel that the actual light output from CFL bulbs is sub-par to incandescent bulbs, but I have never personally had a problem.

• LED bulbs are still just too new in the market place to really be measured against other standard bulbs. Price is certainly a factor right now, but other factors include actual measurement of bulb life span, proper bulb ventilation for cooling, size retro fitting, and actual light output compared to incandescent and CFL bulbs.

There are many types of lighting available in the market place these days. There are also many other bulb types that I did not mention due to there use in commercial settings or the low level of use in residential settings. Lighting technology is still ever changing and manufactures are coming up with new ideas everyday... even the incandescent bulb is still being advanced to keep up with all the other new technological advances. It really comes down to what you want from you light bulb and how much you want to invest in it. Nothing is ever perfect, but as long you do your homework, the power is ultimately in your hands...

All hardware stores including major and mom and pop retailers carry some sort of line of incandescent and CFL bulbs, but LED bulbs are little harder to find. It's always smart to check with you local utility provider before going out to purchase light bulbs, some utility providers provide rebates, coupons, or even discount purchase programs for energy efficient light bulbs. Please see the links below for the Sacramento Valley:

Sacramento Municipal Utility District-

http://www.smud.org/en/rebates/Pages/index.aspx

Pacific Gas & Electric-

http://www.pge.com/myhome/saveenergymoney/rebates/light/products/

Welcome to the Age of Sensors...

We use the technology of sensors in all aspects of our lives, but our homes and buildings are just now catching up. The California Title 24 Energy Codes give you the choice between occupancy sensors or dimmer switches, but in certain areas and circumstances, it really is better to choose the sensor.

Though occupancy sensors are not technically "green" products, they do provide a "green" service to homes and businesses. Have you ever gone to someones house and wondered why the lights are on in every room of the house? Have you ever been driving by an office or school at night and wondered why the lights are all on? This could all be changed or possibly eliminated with the help of occupancy sensors. For years the main focus has been on commercial and institutional applications due to the large amounts of energy waste, but homeowners can also do their part. The link below is to an informational report from 1997 by Green Seal that outlines the use of occupancy sensors and their benefits:

http://www.greenseal.org/resources/reports/CGR=Sensors.pdf

The main focus of this report targets commercial and institutional applications, but the information contained within is invaluable to all who have energy waste. Our homes can be oozing energy waste, especially if we have a lot of occupants living under one roof. Where do our homes need help? Where are the best possible places to put occupancy sensors so we maximize our dollar?

Right off the back I will tell you that it doesn't help to put them in every room in your house. You have to proactive and calculated to get the most bang for your buck. There are a lot of different products to choose from and they all serve a purpose and a function.

For residential applications you can choose from hard-wired, passive infrared occupancy sensors or manual "ON" passive infrared versions:

Edison base, screw in passive infrared occupancy sensors for bare bulb sockets:

There are also other products on the market such as passive infrared and sonic occupancy sensors that are built into surge strips so that electronics can be turned off when no one is in the area, but I find these products very hazardous to electronics and not very conducive to people coming and going from a room. They can work in a commercial or institutional setting, but should not be used in a residential settings unless they are properly factored into an overall design.

When deciding on where to put your sensors you need to take into account a couple of items:

1. What kind of traffic does the room or space get during normal use?
2. What kind of fixture or fixtures are present?
3. What kind of luminary or luminaries do these fixtures use?

Looking at the room or space will help you understand the needs of the space and whether or not an occupancy sensor is conducive to your energy conservation goals. Rooms such as bathrooms, garages, laundry rooms, and closets are some of the best an easiest to figure out. Other rooms in your house may be a little harder such as bedrooms and living rooms; or just plain difficult like kitchens, offices, and family rooms.

Bathrooms are nice because you can put in an occupancy sensor to control the exhaust fan which will allow you to set an allotted time for the fan to run once a person has entered or left the room. Bedrooms may be a little harder due to high levels of usage, but can sometimes benefit from a manual "ON" occupancy sensor if people are prone to leaving lights on all the time. The rooms and spaces labeled as difficult are difficult due to frequent and infrequent usage that may not coincide with a sensors timer or range of motion. If you don't fully think it out you may end up with strange light shows and burnt out fixtures/luminaries in your difficult rooms and spaces.

Numbers 2 and 3 go hand in hand... different occupancy sensors work in different ways when it comes to light fixtures and luminaries that they utilize. First and foremost, you should always follow the guidance of the manufacturer's specifications when it comes to these products. All of these products from the sensors to the luminaries should be tested products (Underwriters Laboratories or other testing agencies), so that you know their limitations and how they should be properly used.

Fluorescent and compact fluorescent (CFL) luminaries do not generally work well with occupancy sensors and the life span of a fluorescent can be drastically cut due to some hard-wired sensors and most Edison base screw types. Fluorescent bulbs have a delayed start up time and cool-down period after being shut off which does not always work well with occupancy sensors. If you go in and out of a room with a sensor and you're using a fluorescent, you run the risk of the bulb burning out quickly or possibly burning out the fixture. Most Edison base type sensors explicitly require incandescent luminaries and some tested LEDs, but a lot LEDs also have a start delay similar to a fluorescent.

After digesting all of this information your finally ready to figure it all out and put together your plan. Even if you only install an occupancy sensor in one room of your house you can still make a difference in your energy consumption and waste. The code gives you a choice, but it never really tells you which is the better choice... at least now you know what one of those choices can do for you and your home.

One of the major manufacturers of hard-wired sensors is Leviton:

http://www.leviton.com/OA_HTML/ibeCCtpSctDspRte.jsp?section=10883&minisite=10026

For Edison base screw type sensors it's First Alert:

http://www.firstalert.com/HOME-SECURITY/OTHER-HOME-SAFETY/lighting

And there are a lot of others such as Wattstoppers, GE, and Z-Wave.

In Sacramento and the greater valley you can pick up occupancy sensors at any major hardware retailer and some smaller hardware stores. If you can't locate the right product you can always find it on the internet direct from the company or from any one of the many large internet retailers such as SmartHomeUSA.com.